Protecting CT and MRI Equipment from Monsoon Moisture Damage :

 

CT MRI room dehumidifier

Every year, when the monsoon season comes to India, hospitals and diagnostic centers face a problem. It is not a problem that you can see, like a roof or a flooded basement. It is a problem that comes in through the air. The air in cities like Mumbai, Chennai, Kolkata and Kochi gets humid between June and September. This humidity is very bad for CT scanners and MRI machines.


A CT or MRI machine is an expensive piece of equipment. It costs a lot of money to buy one of these machines. Many hospitals and diagnostic centers do not protect their equipment well. They just use an air conditioner to keep the room cool. This is not enough to keep the humidity low. In this guide, we will explain how humidity can damage CT and MRI equipment and how to protect it with a kind of dehumidifier.


If you are having problems with humidity in your imaging suite, now you can contact us for free advice. Our engineers will come to your center. Tell you what you need to do to fix the problem.


Why CT and MRI Machines Are So Vulnerable to Humidity


CT and MRI systems are sensitive pieces of equipment. Here are some things that can happen to them when the air is too humid:


1. Water forms on the electronics and circuit boards.


CT and MRI machines have a lot of electronics and circuit boards inside them. When the air is humid, water can form on these parts. This can cause circuits and other problems.


2. High-voltage sparks can form in CT systems.


CT scanners use high voltages. When the air is humid, it can cause sparks to form inside the machine. This can damage the machine. Make it stop working.


3. The image quality gets worse.


When the air is humid, it can affect the quality of the images that the machine produces. This can make it harder for doctors to diagnose problems.


4. Metal parts start to rust, and fungus grows.


When the air is humid, metal parts can start to rust. Fungus can also grow on the machine's cables and other parts.


5. The cooling system gets overloaded.


MRI machines need to be kept cool to work. When the air is humid, the cooling system can get overloaded. This can cause the machine to stop working.


What Do Equipment Manufacturers Actually Require?


The companies that make CT and MRI machines have strict rules about how they should be used. They say that the air in the room should be kept at a certain level of humidity. This is usually between 30 and 60 percent. The temperature should also be kept stable between 18 and 24 degrees Celsius.


The problem is that during the monsoon season, the air outside is very humid. This humid air can get into the room. Cause problems for the machine. A regular air conditioner is not enough to keep the humidity low.


Why Your Air Conditioner Alone Is Not Enough


Many people think that a regular air conditioner is enough to keep the humidity low.. This is not true. Air conditioners are designed to keep the temperature low, not the humidity. When the room gets cool, the air conditioner stops working. The humid air can still get in and cause problems.


A dedicated dehumidifier is needed to keep the humidity low. This machine can work all the time, even when the air conditioner is not working. It can keep the room at a level of humidity even during the monsoon season.


Warning Signs Your Imaging Suite Has a Humidity Problem


Here are some signs that your imaging suite has a humidity problem:


* The room smells musty


* You can see water forming on the walls or equipment


* Metal parts are rusting


* Fungus is growing on cables or other parts


* The machine is not working properly


* The hygrometer is showing a level of humidity


If you see any of these signs, you should contact us for help. We can come to your center. Tell you what you need to do to fix the problem.


The Solution: Industrial Dehumidification for Imaging Suites


The best way to keep your CT and MRI machines safe is to use a dehumidifier. This machine can work all the time, even when the air conditioner is not working. It can keep the room at a level of humidity even during the monsoon season.


We have a range of dehumidifiers that are designed for imaging suites. They are very effective. Can keep the humidity low. We can help you choose the one for your center.


Best Practices for Monsoon-Proofing Your Imaging Suite


Here are some things you can do to keep your imaging suite safe during the monsoon season:


* Run the dehumidifier all the time


* Set the humidistat to 45-55 percent


* Use drainage so the unit never stops


* Seal any air leaks around doors and ducts


* Monitor the humidity level with a hygrometer


* Do not forget to protect the supporting rooms, like the PACS server room and the film storage room


Protect Your Equipment Before the Damage Is Done


Moisture damage to CT and MRI machines is a problem. It can cause the machine to stop working and cost a lot of money to fix. It is preventable. You can protect your equipment by using a dehumidifier.


We can help you today. You can:

📞 Call us for inquiries: 022 4343 2323.

📧 Email us: inquiry@jetindia.co.in

🩺 Get a consultation

🏥 Get a free product demo

🌐 Explore our range of industrial dehumidifiers

👉 Contact Us Now. Book Your Free Consultation or Mumbai Demo

Comments

Post a Comment

Popular posts from this blog

How Humidity Control Impacts Pharmaceutical Product Shelf Life

Image
  How Humidity Control Impacts Pharmaceutical Product Shelf Life A batch of soft gelatin capsules comes off the line looking perfect. Three weeks later, during a routine stability check, someone notices the capsules have gone slightly tacky. Nothing dramatic — no visible mold, no obvious defect — but enough that the QA team has to ask an uncomfortable question: what happened between manufacturing and now? More often than not, the answer is moisture. Not a leak, not contamination in the traditional sense — just humidity that crept a few percentage points outside where it should have been, at some point in the product's journey from mixing room to warehouse shelf. It's an easy thing to overlook because humidity doesn't announce itself the way temperature does. A facility can be running its air conditioning perfectly and still have relative humidity drifting well outside safe limits, because cooling the air and drying the air are two different jobs. Pharmaceutical products —...
Read more

How Humidity Affects Medical Records and Pharmacy Storage Rooms :

Image
  Every hospital, clinic, and pharmacy depends on two assets it simply cannot afford to lose—its medical records and its medicines. Medical records preserve every patient's history, including prescriptions, diagnostic reports, consent forms, treatment notes, and compliance documents. Medicines, on the other hand, are the foundation of patient care, ensuring timely and effective treatment. While these two assets serve different purposes, they face the same silent threat: humidity . Unlike a power failure or equipment breakdown, excess moisture doesn't create an immediate warning. It builds up slowly over weeks and months. One day, archived files begin sticking together. Another day, mould appears on stored documents. Tablet strips become soft, packaging peels away, or labels become difficult to read. By the time these signs appear, the damage has often already been done—and in healthcare, that can lead to legal issues, financial losses, regulatory problems, and risks to patient ...
Read more

Preventing Frost Build-Up in Cold Storage with Dehumidification :

Image
  Walk into any cold storage in India during the monsoon, and you will see it - the telltale sign of white frost creeping up evaporator coils, the frozen residue on door seals, the slippery patches of ice near the dock levellers that nobody wants to drive the forklift over. Frost is one of those things that cold storage managers know to be inevitable. Coils freeze, so they're defrosted. Doors are sealed shut with ice, so they get pried open. The floor is slippery, so they lay down mats and hope nobody hurts themselves. Frost is normal. Frost is part of the process. Unless you're one of the few cold storage owners who've invested in a dehumidifier. Frost is a symptom. One that has a disease and drains your budget in the process. If you're running a cold room that houses frozen seafood in Navi Mumbai, a pharma cold chain warehouse in Pune, or a potato store in Uttar Pradesh, chances are, the frost forming on your coils every day is an indicator of a larger issue - moist a...
Read more